Hydrapak Shape Shift Reservoir 2litre

Blaster Valve
Blaster Valve
The Hydrapak Shape-Shift is a 2 litre reservoir that takes the Elite Reversible Reservoir and adds a internal baffle to lower the profile, reduce sloshing, and disperse weight. The baffle is designed to disengage; enabling the reservoir to be reversed to clean or increase capacity. Please note that when using the internal baffle the capacity is reduced to 1.7 litres. It features the same patented wide slide top opening allows for fast filling and secure seal. The Hydrapak reservoirs can be used in most packs and hydration vests and are standard issue to over FOURTY of the top performance sports brands on the market, including Ultimate Direction, Scott, Dakine, Oakley, Vaude, Caribee, Salomon, Evoc, Klim, Fox, and UltrAspire. Once clean, FuelME recommends storing the empty reservoir in your freezer to prevent mould, or discolouration developing.
In stock:
Out of Stock
Shop By Sport:
2 Litre (1.7litre with baffle fitted)
USD $39.85 $32.78 exc. GST

Hydrapak Shape Shift 2Litre Reservoir Features

Shape-Shift™ baffle locks for a slim profile and increased stabilization; unlocks for full volume and reverses for easy cleaning
Slide-Seal™ top opens wide for easy filling and closes tight for a leakproof seal
High-flow Blaster™ bite valve self seals after each sip and features a twist on/off bar to prevent leaks when not in use
Plug-N-Play™ connect system lets you easily disconnect the drink tube (an auto shutoff valve prevents leaking) and remove the reservoir from your pack for convenient refilling
Fully reversible for easy cleaning and drying, top-shelf dishwasher safe
Made of ultra-durable, abrasion resistant TPU & RF welded seams for superior durability and elasticity
Can be frozen or filled with hot water (max temp 60° C / 140° F
Safe and reliable, 100% BPA & PVC free

Shape Shift 2L Dimensions

Height.......................Width.......................Depth..................Volume (Baffled)
330 mm / 13 in............165 mm / 6.5 in.........20 mm / 0.8 in.....2L / 70 oz. 1.7L / 58 oz.

Weight for compete system: 2L (70oz.) 140 grams (4.9oz)

WHAT'S INCLUDED IN THE BOX? Each reservoir kit includes:
Slide-Seal™ Top with Tether
36" HydraFlex™ Tube
Blaster™ Bite Valve
Plug-N-Play™ Connect System
Removable Pack Clip
Silicone Lubrication
Basic Care & Use Intructions

As simple as it gets - reverse by placing your hand in the reservoir (make sure it's empty!), grab the bottom, and pull it back through the top opening. It's just like turning a sock inside-out. The molded opening can also be flipped after the reservoir body has been reversed. Then, throw it in the dishwasher or rinse with mild soap and water. Make sure to let the reservoir dry out completely while reversed.

While throwing your tube set in the freezer is a great way to prevent anything funky from happening, if you are hydrating with anything other than water you will want to keep it clean. All of our components are removable for easy cleaning: 1. Disconnect the drink tube from the reservoir 2. Grasp the bite valve in one hand and tube in the other then pull the valve firmly to remove the bite valve from the tube 3. Gently remove the silicone sheath from the valve and clean with Bottle Bright or mild soap and water 4. Clean the inside of the tube by inserting the Hydrapak Tube Brush in the open end of the tube and scrub 5. After drying the components, carefully reattach the sheath to the valve and re-install.

There is a small hook on the Slide-Seal™ top, and you can attach the tether to that point. When you want to unattach the leash, pull the tether's loop to unattach.
Salomon™ Customers - NOTE that the reservoir Hydrapak produce for Salomon™ shares the same dimensions as the 1.5L, but the exit port points to the side.